Medium Temperature-10~350° Working Environment Temperature 20~45C
4Mpa Thermal Gas Mass Flow Meter
120Nm/S Thermal Gas Mass Flow Meter
DN2000 Thermal Gas Mass Flow Meter
120Nm/S 4Mpa Thermal Gas Mass Flow Meter
Thermal gas mass flow meter is an instrument that uses the principle of thermal diffusion to measure gas flow. The sensor consists of two reference thermal resistance (RTD) components. One is the speed sensor RH, and the other is the temperature sensor RMG that measures the temperature change of the gas. When the two RTDs are placed in the measured gas, the sensor RH is heated, and the other sensor RMG is used to sense the temperature of the measured gas. As the gas flow rate increases, the gas flow takes away more heat, and the temperature of the sensor RH decreases.
Convenient installation, simple maintenance, two-way detection, anti-vibration
Up to 24 points of flow measurement
Correction of output analog multi-point non-linear curve correction
Wide range ratio 100:1
Simultaneous detection of flow and temperature, switch display
Large diameter and small flow measurement, can be used for leak detection
The thermal flow meter is a flow meter designed based on the principle of thermal diffusion. That is, when the fluid flows through the heating object, the heat loss of the heating object is proportional to the flow rate of the fluid. The sensor of this series of flow meters has two standards Grade RTD, one is used as a heat source, and the other is used to measure the temperature of the fluid. When the fluid flows, the temperature difference between the two has a linear relationship with the flow rate. Converted to a linear output measuring flow signal.
Thermal gas flow meters are widely used
Thermal gas flow meters are widely used in steel plants, coking plants, petroleum, chemical, thermal, medical, thermal power plants, environmental protection and other industries.