From HCATM, Serve the world
| Place of Origin: | Xi'an |
|---|---|
| Brand Name: | HCATM |
| Certification: | CE，RoHS |
| Model Number: | GMP501-D |
| Minimum Order Quantity: | 1 |
| Packaging Details: | Packed in cardboard or wooden cases |
| Delivery Time: | 3-5 days |
| Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability: | 100000 pieces per month |
| Range: | -0.1MPa┅0MPa ~ 0.01MPa┅100MPa | Acuracy: | ±0.5%FS |
|---|---|---|---|
| Medium: | Gas/Liquid | Protect Level: | IP65 |
| High Light: | Piezoresistive Pressure Transmitter,RS485 Pressure Transmitter,IP65 Water Pressure Transducer |
||
GMP501-D intelligent pressure transmitter adopts pressure sensor with high stability and special circuit of micro power transmitter, the product has low power consumption in normal operation and stable and reliable performance.
Reliable performance, easy to install and use
Special circuit for micro power consumption, less than 15mw
Gauge pressure, absolute pressure and seal reference pressure can be measured
| Pressure parameter | |||
| Range | -0.1MPa┅0MPa ~ 0.01MPa┅100MPa | ||
| Overload | 2 times full scale pressure or 110MPa (whichever is the smallest) | ||
| Pressure type | Gauge, Absolute, Sealed Gauge | ||
| Electrical parameters | |||
| Power supply | 12~28V DC | ||
| Output signal | 4mA~20mA DC (two-wire system) RS485 communication | ||
| Load resistance (Ω) | ≤(U-12) /0.02 | ||
| Insulation resistance | 50MΩ @ 50V DC | ||
| Structural parameters | |||
| Case | Stainless steel 304 | ||
| Sensor | 316L stainless steel | ||
| Sealing ring | Fluororubber | ||
| Cable | ∅7.5mm polyethylene special cable | ||
| Protection class | IP65 (plug-in type) | IP68 (cable type) | |
| Environmental conditions | |||
| Media suitability |
Various fluids that are non-corrosive to 316L stainless steel and fluorine rubber |
||
| Compensation temperature | -10 ℃~+ 80 ℃ | ||
| Operating temperature | -30 ℃~+ 70 ℃ | ||
| Storage temperature | -30 ℃~+ 70 ℃ | ||
| Performance | |||
| Accuracy | ±0.25% FS (typical) | ±0.5% FS (maximum) | |
| Zero temperature coefficient | 0.03%FS/℃(≤100kPa)；0.02%FS/℃(＞100kPa) | ||
| Full temperature coefficient | 0.03%FS/℃(≤100kPa)；0.02%FS/℃(＞100kPa) | ||
| Long-term stability | ±0.1% FS / year (maximum) | ||
