From HCATM, Serve the world
| Place of Origin: | Xi'an |
|---|---|
| Brand Name: | HCATM |
| Certification: | CE，RoHS |
| Model Number: | GML801-B |
| Minimum Order Quantity: | 1 |
| Price: | 2000USD/pcs |
| Packaging Details: | Packed in cardboard or wooden cases |
| Delivery Time: | 3-5 days |
| Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability: | 100000 pieces per month |
| Medium: | Liquid / Solid | Acuracy: | ±3mm; ±5mm; ±10mm; ±15mm |
|---|---|---|---|
| Output: | 4~20mA/HART/RS-485 Modbus | Shell MaterialMaterial: | Aluminum/plastic |
| Power: | 24VDC (two-wire System); 24VDC/220VAC (four-wire System) | Temperature: | -40 ° C ~ 250 ° C |
| High Light: | load cell transducer,wireless load cell |
||
70m 4-20mA Liquid 24VDC 26GHZ Radar Level gauge
Working Principle
Radar level antennas emit narrower microwave pulses that are transmitted downward through the antenna. After the microwave contacts the surface of the measured medium, it is reflected back and received again by the antenna system. The signal is transmitted to the electronic circuit and automatically converted to the level signal. The time taken is almost instantaneous).
Measurement datum: Thread bottom surface or flange sealing surface.
Note: When using radar level timing, be sure to ensure that the highest material level cannot enter the measurement blind zone (the area shown by D in the figure).
Technical Parameter
| model | GML801-B |
| Applicable medium | Liquid, solid particles, powder |
| Range | 0~70m |
| frequency | 26GHz |
| antenna | Horn antenna |
| Precision | ±3mm; ±5mm; ±10mm; ±15mm |
| Process temperature | -40 ° C ~ 250 ° C |
| Process pressure | -0.1MPa～4.0MPa |
| Output | 4~20mA/HART/RS-485 Modbus |
| Live display | Four-digit LCD programmable |
| power supply | 24VDC (two-wire system); 24VDC/220VAC (four-wire system) |
| shell material | Aluminum/plastic |
| Process connection | Thread / flange (optional) |
| Explosion-proof grade | ExiaIICT6Ga/ExdiaIICT6Gb |
|
Remarks |
Installation methods, materials, accuracy requirements, ranges and other parameters can be customized according to different customer needs. |
