The integrated ultrasonic level gauge is widely used for liquid level and volume measurement of tanks, pools, and reservoirs, as well as for flow measurement in open channels.
Split ultrasonic level difference meter
The conventional range is 5 m,10m, 15m, 20m (other ranges can be customized)
3mm or 0.1% (whichever is greater)
128*64 dot matrix English LCD
2 4~20mA/510Ω load
2 groups of AC 250V-8A or DC 30V/5A state programmable (optional)
220V AC+15% 50Hz or 24VDC 120mA optional
display instrument (transmitter) -20~+60°C
IP65 for display instrument, IP68 for probe
conventional 10 meters, other specifications can be customized
Ultrasonic level difference meter (material level, liquid level) is used to measure the liquid level or the difference in level of two different containers.
The most common is to measure the water level before and after the coarse grid and the fine grid at the water inlet of the sewage treatment plant, and calculate the height of the water level difference, which is used to start the anti-fishing decontamination machine to remove the garbage.
Example of water level control setting
It is required that the water level in the pool is below 1 meter, and the water pump stops draining; the water level rises to 5 meters, and the water pump starts to drain
The settings are as follows: Mode: High alarm. Alarm value: 5.00m; Alarm hysteresis: 4.00m.
For water intake
It is required that the water level in the pool is below 1 meter, and the water pump starts to enter the water; the water level rises to 5 meters, the water pump starts to stop the water intake.
The settings are as follows: Mode: Low alarm. Alarm value: 1.00m; Alarm hysteresis: 4.00m.